01
2026-08-26How to Specify a Custom LiFePO4 Battery Pack
The electrical, mechanical and commercial inputs a battery manufacturer needs before proposing a custom pack.
Read articleTECHNICAL KNOWLEDGE
Better battery decisions
start with the application.
Practical notes for specification, integration and project planning.
02
2026-08-26AGV and AMR Battery Selection Guide
How duty cycle, peak current, regenerative current, charging and communication affect a mobile-robot battery design.
Read article03
2026-08-26Lead-Acid to LiFePO4 Conversion Checklist
A system-level checklist for evaluating lithium replacement batteries without assuming drop-in compatibility.
Read article04
2026-10-05How to Calculate Battery Capacity for a Solar CCTV System
Learn how to calculate battery capacity for a solar CCTV system using equipment load, operating hours, required autonomy, system voltage and usable battery energy.
Read article05
2026-08-26How to Choose Energy Storage Battery Capacity
A practical approach to energy, power, runtime, inverter and expansion planning for residential and C&I storage.
Read article06
2026-10-06How Much Battery Autonomy Does a Solar CCTV System Need?
Learn how to determine battery autonomy for a solar CCTV system based on equipment load, solar conditions, required uptime and usable battery energy.
Read article07
2026-08-26CAN vs RS485 for Battery Communication
Why the connector name is not enough and the exact communication protocol must be reviewed for battery integration.
Read article08
2026-10-1512V vs 24V vs 48V for Solar CCTV: Which Voltage Should You Choose?
A higher battery voltage can reduce DC current, but it does not automatically make a solar CCTV system more efficient or compatible. Compare 12V, 24V and 48V architectures using load power, cable length, controllers and equipment voltage requirements.
Read article09
2026-10-13Can You Replace an AGM or GEL Solar CCTV Battery with LiFePO4?
Replacing an AGM or GEL battery in a solar CCTV system requires more than matching voltage and capacity. Review charger settings, LVD, BMS protection and installation requirements before upgrading to LiFePO4.
Read article10
2026-10-08Why Solar CCTV Batteries Run Low Even When Charging
A solar CCTV battery can receive charging current every day and still run low. Learn how to check daily power consumption, solar energy balance, controller settings and battery recovery before increasing capacity.
Read article11
2026-10-26Peak vs Continuous Discharge Current for AGV Batteries
A peak-current figure is incomplete without duration and repetition. Review the complete load profile, BMS protection, cells, cables and connectors before choosing an AGV battery.
Read article12
2026-10-25Regenerative Current in AGV Battery Systems
Regenerative braking returns charging current to the DC system. Verify the battery's charge acceptance, switching path and controller response before approving an AGV configuration.
Read article13
2026-10-25Opportunity Charging for AGV and AMR Batteries
Short charging windows work only when the energy balance, battery charge limits and dock controls match the robot's duty cycle. Learn what to verify before specifying opportunity charging.
Read article